Kintraw

Anderson Floor Warming designed, supplied and installed Nibe ‘Fighter’ 1140 12kW Ground Source Heat Pump with a domestic hot water cylinder linked via our joint free pre-insulated PEX heating primary system to the heating system, utilising pipe in rail to the ground and lower ground floor, and pipe in pug underfloor heating on the first floor.

Pre-insulated joint free PEX pipe hot and cold primary system distributed the mains pressure hot and cold water to the secondary manifolds throughout the property.

Below a custom-built surround for the manifold chamber.

Linndhu

Anderson Floor Warming designed, supplied and installed Nibe ‘Fighter’ 2015 11kW Air Source Heat Pump with a 450/300 VPAS domestic hot water cylinder linked via our joint free pre-insulated PEX heating primary system to the heating system, utilising LK slotted wood 22 underfloor heating to the ground floor and a mixture of LK slotted wood 22 underfloor heating and radiators on the first floor.

Pre-insulated joint free PEX pipe hot and cold primary system distributed the mains pressure hot and cold water to the secondary manifolds throughout the property. Solar thermal panels have also been installed on the roof.

Email received from the happy customer:-

“Dear Mike, This is to express a big thank you to Pete and Mikey Craig for the effort they made last Monday and Tuesday to get our heating and Hot water system up and running. My understanding is that they left Fife at about 4am on Monday to catch the first boat and still did a full day’s work.
Could you pass our thanks and appreciation on to them both as we got distracted by another issue and failed to say good bye when they left.
As far as we can see the system is working and Pete was kind enough to give us his Mobile number in case we have questions later on.
Finally, could you let us know what the final balance to pay is and let us have whatever invoice or completion paperwork we’ll need to close the loop with the Low Carbon Buildings Grant which in our case expires early next Month.
Best Regards and thanks to all your team for a job well done.
Neil and Liz MacGilp”

Barquhey Farm Plot 3

Anderson Floor Warming designed, supplied and installed Nibe ‘Fighter’ 2015 11kW Air Source Heat Pump with a VPA 300/200 domestic hot water cylinder, linked via our joint free pre-insulated PEX heating primary system to the underfloor heating system, utilising pipe in staple on both floors.

In addition to this, Anderson Floor Warming also did the design, supply and installation of a mechanical heat recovery ventilation system and solar thermal for hot water.

This property was featured in a Case Study in the November 2010 Build It + Home Improvement magazine:

Liz Marquis and husband Duncan both work in energy generation and energy efficiency so they were keen to install UFH into the ground floor of their new build.

The countryside plot has no mains gas so UFH powered by an air source heat pump was ideal. Anderson Floor Warming, which supplied the system, was also able to integrate it with solar water panels and a heat recovery ventilation system. The couple chose oak composite and tiled floors that would be easy to clean and keep free of dog hair, and which work effectively with UFH.

Liz says they are really enjoying their warm house. “I got fed up having cold feet in our old stone Victorian house so underfloor heating really appealed. The system is really energy efficient and our heating costs are much lower now.”


Rockcliffe House

A new build house near Newton Mairns where we designed, supplied and installed the entire heating system. A 14kW Ecodan air source heat pump supplies underfloor heating on the ground floor, radiators on the first floor in addition to hot water for the property. We also installed a heat recovery ventilation system in addition to hot water heating.

Dwelling House Extension, Lennoxtown

This garage and extension to an existing dwelling house is fitted with an Anderson Floor Warming And Renewables underfloor heating system. The heating is supplied by a Nibe Fighter 1330 22kW ground source heat pump which was sized for future office and store adjacent to the building which has now also been connected to the heat pump using our microflex pre-insulated underground pipework.

Due to different floor constructions within the building, pipe in staple and pipe in plate was used for the underfloor heating. The store has pipe in staple underfloor heating and traditional radiators serve the office.

Anderson Floor Warming And Renewables designed, supplied and installed the entire heating system including heat pump, underfloor heating, radiators and hot and cold plumbing.

Dwelling House, Newton Mearns

This new build house in Newton Mearns is fitted with an underfloor heating system on the ground and first floor supplied by a Mitsubishi Ecodan 14kW air source heat pump installed by Anderson Floor Warming And Renewables.

Mossgeil Farm

A new build house at Mossgeil Farm in Ayrshire. Anderson Floor Warming And Renewables designed, supplied and installed a ground source heat pump and underfloor heating to the ground and first floor.

The ground source heat pump is a Vaillant 10kW geoTHERM. This supplies the domestic hot water and the underfloor heating system. The ground floor uses the popular pipe in staple system and the first floor uses our pipe in plate system on the wooden joist floor.

The heat pump is connected to two 300m length horizontal collectors laid out in the field behind the house 1m below ground level.

East Cambusmoon Farm Cottages

Having previously worked on the house at East Cambusmoon Farm, we were also involved in the renovation of former dairy buildings in to 2 holiday cottages.

The client’s own blog showcases both builds and this is what they had to say about working with Anderson Floor Warming And Renewables again:-

‘We’re using Anderson Floor Warming for the underfloor heating, hot and cold water systems, installation of the ground source heat pump and solar. We are happily working with the same builder, subcontractors and architect as we did on the house so its nice to see familiar faces back on site.

For more photos and a detailed diary of both builds we recommend having a look at eastcambusmoon.blogspot.comEast Cambusmoon Farm Cottages

Baldow House

Anderson Floor Warming designed, supplied and installed Nibe ‘Fighter’ 1330 30kW Ground (Water) Source Heat Pump with a 450/300 VPA domestic hot water cylinder linked via our joint free pre-insulated PEX heating primary system to the heating system, utilising a mixture of pipe in screed underfloor heating, radiators and towel rails.

The heat pump is connected to collectors from three boreholes and also a pond collector loop in a man made pond within the ground of the property.

The pond where the collector loops are sunk to get energy for the ground source heat pump.

Pre-insulated joint free PEX pipe hot and cold primary system distributed the mains pressure hot and cold water to the secondary manifolds throughout the property.

Private House, Bothwell

Anderson Floor Warming And Renewables designed supplied and installed the underfloor heating and heat recovery ventilation system to this new build house for Damian Turner of Turner Accountancy Ltd.

More impressive than the 500m² house itself is the fuel bill which, after the first year in the house is less than £600/year. Damian was so impressed he sent us a copy of his fuel bill and this comment:-

“Thanks again for all your help during the build and your teams professionalism.

Underfloor is working great, as is the heat recovery.”

Damian and Sharon Turner
Bothwell

As they get more familiar with the system and controls the fuel usage should come down even further.